01
Pre-treatment
Inspect the carpet and apply a cleaning solution to the carpet to help loosen any ground-in dirt and stains.
02
Agitation
We may use a machine to agitate the cleaning solution and dirt to help break it down and remove it from the carpet fibers.
03
Hot Water Extraction
This method involves using hot water extraction machines to flush the carpet with hot water, cleaning solution & extract dirt & stains
04
Spot Treatment
If there are any remaining stains after the cleaning process, We may use a specialized stain removal treatment to remove them.
05
Drying
After the carpet is thoroughly cleaned, it needs to dry completely. We may use fans or air movers to speed up the drying process.
06
Post-Inspection
Finally, We will inspect the carpet to ensure that it has been thoroughly cleaned and to address any remaining issues or concerns.
01
Prime your Tiles
First step starts with Pre-treatment involves applying a cleaning solution to the tile to help loosen any ground-in dirt and stains.
02
Scrubbing
We may use a scrubbing machine or a brush to agitate the cleaning solution, break down the dirt and remove it from the tile surface and grout.
03
High-Preassure Water Extraction
High-pressure water extraction machines flushes the tile & grout with hot water and extract dirt using a vacuum
04
Drying
After the tile and grout are thoroughly cleaned, it needs to dry completely.We may use fans or air movers to speed up the drying process
